Twenty-six product lines across five forms — every one available in stainless, duplex, nickel alloy and titanium.
Long-hub WN flange butt-welded to pipe, for high pressure and cyclic service.
Specifications
Rotating loose flange used with a stub end — easy bolt-hole alignment and cheap to replace.
Specifications
Plate flange slipped over the pipe and fillet-welded both sides — the economical standard flange.
Specifications
Small-bore socket weld flange, single external weld, DN6–DN100.
Specifications
Solid disc blind, RF / FF / MFM / TG / RJ, Class 150–2500.
Specifications
Flanges to drawing: non-standard bolt circles, profiles, tapers and mixed faces.
Specifications
Flanges in Hastelloy, Inconel, Monel and titanium for extreme corrosion or temperature.
Specifications
Slip-on flange with a raised hub — stiffer than a plate flange, cheaper than a weld neck.
Specifications
Cold-rolled / cold-drawn precision tube, mirror bore, tight wall tolerance.
Specifications
Small-bore precision tubing for impulse, sampling and signal lines.
Specifications
Hygienic stainless tube, Ra ≤ 0.8 µm bore, CIP/SIP compatible.
Specifications
Hot-rolled and cold-drawn seamless pipe, 4–900 mm OD, carbon to nickel alloy.
Specifications
ASME B16.11 socket-weld and threaded elbows, 3000LB to 9000LB, DN6–DN100.
Specifications
Socket-weld and threaded tees, equal and reducing, 3000LB–9000LB.
Specifications
Four-way forged cross, equal and reducing, socket weld or threaded.
Specifications
Full and half coupling, equal and reducing, socket weld or threaded.
Specifications
Seamless stamped 90° elbow, LR or SR, DN15–DN2000, to ASME B16.9 / GB/T 12459.
Specifications
Seamless 45° elbow for gradual direction change with low pressure loss.
Specifications
Seamless equal and reducing tees, DN15–DN2000, ASME B16.9.
Specifications
Four-way butt-weld cross, equal and reducing, seamless formed.
Specifications
Seamless concentric reducer, DN50×40 to DN2000, smooth conical transition.
Specifications
Flat-bottom or flat-top eccentric reducer to avoid liquid pockets or gas traps.
Specifications
Seamless rolled rings up to 7.5 m outside diameter, IT7–IT9 tolerance.
Specifications
Forged round bar Φ80–Φ1200 mm, forging ratio ≥4:1, UT to GB/T 6402 or ASTM A388.
Specifications
Forged square billet 40–1000 mm, dense core, for dies, tools and machined blocks.
Specifications
Non-standard forgings to drawing — complex profiles, thin walls, tight tolerances.
SpecificationsQuotes within one business day. Send grade, size, pressure class, face type and quantity — a drawing works better than a description.
